The (applicable modifiers t o describe the type of pushbutton switch covered by this Detail Specification ) pushbutton switches of certified quality covered by this Detail Specification:

a) mount in a panel hole of ( insert dimensions of the mounting hole) ;

b) have a maximum rated voltage of ( insert the highest

c) have a maximum rated current of ( insert the highest rated voltage only ) ; and rated current only.)

Type Designation

Switches covered by this Detail Specification shall be described by the following in the order shown:

a) The number for this Detail Specification.

Example of Type Designation: (The Detail Specification shall completely define the part numbering system).

Marking

The marking of the switch and package shall be i n accordance with the requirements of Sub-clause 2.5 of the Generic Specification. ( Insert the details of marking on the switch and on the package, including any special marking requirements),

Ordering Information

Orders for switches covered by this Specification shall contain the following information as a minimum:

a) The applicable part number per Sub-clause 1.2;

b) (Insert the number and edition of the Detail Specification); and

c) When certified records of released lots are required, include "CERTIFIED RECORDS REQUIRED".

Certified Records of Released Lot

(Insert the information required by Sub-clause 3.4.1 of the generic Specification.)

Safety Considerations

The user shall consider the suitability of the switch with regard to any safety requirements applicable to the equipment.

Common Features

(The common features of this pushbutton switch type shall be given preferably using an olique drawing.)

Dimensional Parameters

(The necessary information shall be given with respect to the mounting and the switch dimensions. See Sub-clause 2.6.1 of the Sectional Specification.)