Scope and object

Replacement:

Substation cable distribution boards (SCDBs) and cable distribution cabinets (CDCs) for power distribution in networks shall comply with all the requirements of IEC 60439-1 (1999) if not otherwise indicated hereinafter and shall also comply with the particular requirements contained in this publication.

This standard gives supplementary requirements for substation cable distribution boards (SCDBs) and cable distribution cabinets (CDCs), which are stationary, type-tested assemblies (TTA). They are used for the distribution of electrical energy in three-phase systems. Opentype ASSEMBLY are not covered by this standard.

Individual components, such as fuses and switching devices that comply with other standards, shall also comply with the supplementary requirements of this standard.

The object of this standard is to state the definitions and to specify the service conditions, construction requirements, technical characteristics and tests for SCDBs and CDCs. Higher performance and test levels may be required for particular networks, for example, those with meshed connections.

NOTE 1 If a CDC is equipped with additional equipment (for example meters), in such a way that the main function is changed considerably, then other standards may also apply as agreed between user and manufacturer (see 7.6).

NOTE 2 Where local regulations and practices permit, an SCDB or CDC according to this standard may be used in other than public networks.

SCDBs are suitable for installation in places where only skilled persons have access for their use; however, outdoor types may be installed in situations which may be accessible to the public.

SCDBs are connected to the low voltage terminals of distribution transformers by means of connecting bars, rods or cables.

CDCs are for outdoor installation in places which are accessible to the public, and where only skilled persons have access for their use.