This standard specifies the characteristics of aeronautical ground lighting series transformers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard. An AGL series transformer is be able to withstand a permanent short or open-circuit secondary series circuit. Specifications for similar series transformers intended for any primary or secondary currents other than 6,6 A, or to supply alternative voltage, constant power, reactive loads, ect., are not included in this standard.