The point-of-use reverse osmosis drinking water treatment systems addressed by this Standard are designed to be used for the reduction of specific substances that may be present in drinking water supplies (public or private) considered to be microbiologically safe and of known quality (except that claims for the reduction of filterable cysts may be permitted). Systems covered by this Standard are intended for reduction of total dissolved solids (TDS) and other contaminants specified herein. Systems with components or functions covered under other NSF or NSF/ANSI Standards or Criteria shall conform to the applicable requirements therein.

Purpose

The purpose of this Standard is to establish minimum requirements for materials, design and construction, and performance of reverse osmosis drinking water treatment systems. This Standard also specifies the minimum product literature that manufacturers shall supply to authorized representatives and owners, as well as the minimum service-related obligations that manufacturers shall extend to system owners.

Customers who purchased NSF 58
also purchased

• NEMA MG 1 : Motors and Generators-Incorporates Errata: October 2012
• ASME B30.2 : Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)-Includes Interpretations through January 2010
• ASME B16.5 : Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard
• ASME B18.1.2 : Large Rivets 1/2 Inch Nominal Diameter and Larger-Revision of B18.4-1960

See More Documents