This International Standard specifies five methods for determining the ozone resistance of the outer covers of hoses:
. method 1, for bore sizes up to and including 25 mm, carried out on the hose itself;
. method 2, for bore sizes greater than 25 mm, carried out on a test piece from the hose wall;
. method 3, for bore sizes greater than 25 mm, carried out on a test piece from the cover;
. method 4, for all bore sizes, carried out on the hose itself;
. method 5, for all bore sizes, carried out on hoses that are expandable, for example textile-reinforced
hoses.
NOTE For hoses with built-in fittings from which it is not possible to take test pieces, the ozone resistance may be assessed on slabs in accordance with ISO 1431-1, using test sheets of the appropriate polymeric compound vulcanized to the same degree.