This European Standard specifies requirements for protective provisions against the effects of stray currents, which result from the operation of d.c. traction systems.As experience for several decades has not shown evident corrosion effects from a.c. traction systems and actual investigations are not completed, this European Standard only deals with stray currents flowing from a d.c. traction system.This European Standard applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which can carry stray currents resulting from the operation of the railway system.This European Standard applies to all new d.c. lines and to all major revisions to existing d.c. lines. The principles may also be applied to existing electrified transportation systems where it is necessary to consider the effects of stray currents. It provides design requirements to allow maintenance. The range of application includes:a) railways,b) guided mass transport systems such as:1) tramways,2) elevated and underground railways,3) mountain railways,4) trolleybus systems, and5) magnetically levitated systems, which use a contact line system,c) material transportation systems.This European Standard does not apply to:d) mine traction systems in underground mines,e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the traction power supply system,f) suspended cable cars,g) funicular railways.This European Standard does not specify working rules for maintenance.

Customers who purchased DS DS/EN 50122-2
also purchased

• ANSI C57.12.50 : Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for-Now copyrighted by NEMA; Removed at the request of NEMA; Correction June 1982
• DS DS/EN 1125/ZA : Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
• DS DS/EN 50085-1:1998/A1 : Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
• DS DS/EN 50133-1/A1 : Alarm systems - Access control systems for use in security applications - Part 1: System requirements

See More Documents