TIA TIA-1040.1.05
TA TA-1040105 2005-APR-01 Regeneratve Satellte Mesh-A RMS-A Ar nterface - Physcal Layer Specfcaton - Part 5 Rado Transmsson and Recepton
TA TA-1040105 2005-APR-01 Regeneratve Satellte Mesh-A RMS-A Ar nterface - Physcal Layer Specfcaton - Part 5 Rado Transmsson and Recepton
The present document defines the Radio Frequency (RF) requirements for the Satellite Terminal (ST) transceiver of the Regenerative Satellite Mesh - A (RSM-A); Air interface operating in the Fixed Satellite System (FSS) allocations at Ka-band as follows:
• ST reception is in the Fixed Satellite Service (FSS) frequency ranges from 17,70 GHz to 19,70 GHz and from 19,70 GHz to 20,20 GHz;
• ST transmission is in the frequency ranges allocated to FSS from 27,50 GHz to 29,50 GHz and from 29,50 GHz to 30,00 GHz.
Requirements are defined for two categories of parameters:
• those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands;
• those that define the transmission quality of the system.
These requirements apply to all types of ST that transmit a single modulated carrier, including STs with an antenna diameter greater than 1,8 m (or equivalent corresponding aperture).
The technical requirements of the present document apply under the environmental profile for operation of the equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical requirements of the present document at all times when operating within the boundary limits of the declared operational environmental profile.
The environmental profile for operation of the equipment shall include the ranges of humidity, temperature and supply voltage.