Introduction

Intent

The intent of this test procedure is to measure the central wavelength, peak wavelength, and the spectral width (RMS and FWHM) of a semiconductor light-emitting diode (LED) using a dispersive spectrophotometric method (that is, using a revolving diffraction grating) or other suitable methods.

NOTE:

RMS is the Root Mean Square and FWHM is the Full Width Half Maximum (3 dB down).

Accuracy and precision

The uncertainty of the procedure is determined by the uncertainty of the optical spectrum analyzer and the number of data points selected. The precision of the method is determined by the precision of the optical spectrum analyzer and the resolution setting used. The precision of this procedure may be enhanced by averaging several sweeps.

Hazards

This procedure involves measurements of energized optical sources. Exercise care to avoid possible eye damage. Do not look into the end of an energized fiber directly or with a magnification device.

Applications

This procedure is applicable to all light-emitting diodes.

Customers who purchased TIA TIA-455-126
also purchased

• NEMA C12.1 : Electric Meters Code for Electricity Metering
• NEMA Z535.4 : Product Safety Signs and Labels
• API SPEC 5L : Specification for Line Pipe-FORTY-FOURTH EDITION; Incorporating Errata: January 2009, Addendum 1: February 2009, Addendum 2: April 2010; Addendum 3: July 2011 Effective Date: January 1, 2012; ISO 3183:2007 Adoption
• API STD 598 : Valve Inspection and Testing-Ninth Edition

See More Documents