SAE J2534-1 defines a standard vehicle network interface that can be used to reprogram emission-related control modules. However, there is a need to support vehicles prior to the 2004 model year as well as non-emission related control modules.

The SAE J2534-2 document meets these needs by detailing extensions to an SAE J2534-1 specification. It is not required for an interface to be fully compliant with SAE J2534-1 specification to implement some of the features specified in this document. Together, these extensions provide the framework for a common interface to protect the software investment of the Vehicle OEMs and Scan Tool manufacturers.

Only the optional features will be described by this document and are based on the December 2004 publication of SAE J2534-1.

Purpose

Each section included in this document specifies features that extend the SAE J2534-1 specification. The specific feature operation will be described directly or reference another existing specification. In each case the required calling structure, via the SAE J2534-1 API, will be documented and coordinated by this document.

Extending the protocols supported by SAE J2534-1 this document adds two new types of ProtocolIDs.

1. ProtocolIDs with the suffix ‘_PS' for connecting to a vehicle, via the SAE J1962 connector using the technique outlined in the section titled ‘Pin Selection'.

2. Generic ProtocolIDs, with the suffixes ‘_CH1' through ‘_CH128' for protocols that terminate at a vendor specific connector on the device. See the section titled ‘Access to Additional Channels'.

Documentation Convention

For each protocol defined in this document:

• Unless explicitly specified otherwise, all SAE J2534-1 PassThru function calls will be supported.

• SAE J2534-1 ConnectFlags, RxStatus, TxFlags and Indications are not supported unless explicitly specified.

Customers who purchased SAE J2534-2
also purchased

• SAE J1128 : Low Voltage Primary Cable
• SAE J1654 : High Voltage Primary Cable
• SAE J1673 : High Voltage Automotive Wiring Assembly Design-This document has been declared "Stabilized" by SAE
• SAE J1766 : (R) Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing

See More Documents