This recommended practice provides minimum requirements for testing components or systems of the type which can be switched from one truck to another with relative ease; i.e., aerodynamic devices, clutch fans, radial tires, and the like. The test utilizes in-service fleet vehicles, operated over representative routes. The relative fuel effectiveness of the component or system under test is determined as a percentage improvement factor. This factor is calculated using the relative fuel usage of like vehicles operating with and without the specific component or system under evaluation. Accuracy capability employing this test technique is either ±1% or ±2%, depending upon the method of fuel measured. (See paragraph 7.4.)

Customers who purchased SAE J1264
also purchased

• ASME B18.16.1M : Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts-Errata - December 1980
• ASME B18.22.1 : Plain Washers-Reaffirmation and Redesignation of ASA B27.2-1965
• ASME B18.1.3M : Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller-Errata - October 1985
• ASME B5.48 : Ball Screws-Errata - March 1979

See More Documents