1. Scope - This SAE Standard applies only to spark plugs used for ground vehicles and stationary engines.

This document is intended to serve as a guide to dimensions common to the majority of current production spark plugs and future applications. It is not the intent of this document to prohibit the manufacture of spark plugs having dimensions differing from those presented. Many applications exist which require specialized or nonstandard spark plugs. It is recommended that this document be used in spark plug design and engine applications wherever possible. Whenever design situations arise that prevent the use of one of these standard spark plugs, a spark plug manufacturer should be contacted for guidance.

Figures 1 to 13 and Tables 1A to 6 show typical configurations of unshielded and shielded spark plug designs, their dimensional characteristics, installation, threaded hole, and spark plug thread sizes.

1.1 Thread Gages - In order to keep the wear on threading tools within permissible limits, the threads on the spark plug GO (ring) gage shall be truncated to the maximum minor diameter of the spark plug, and the tapped hole GO (plug) gage to the minimum major diameter of the tapped hole. The plain plug gage for checking the minor diameter of the tapped hole shall be the minimum specified.

Customers who purchased SAE J548-1
also purchased

• ASME Y14.5 : Dimensioning and Tolerancing
• ABNT NBR ISO 9001 : SISTEMAS DE GESTAO DA QUALIDADE - REQUISITOS
• GSA A-A-2316 CANC NOTICE 1 : FILE, HAND (AMERICAN PATTERN), MILL
• GSA A-A-2322A : FILE, HAND (AMERICAN PATTERN), THREE SQUARE

See More Documents