This document covers two types of hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications as flexible connections within the temperature range of -40 °C to +120 °C (-40 °F to +250 °F) average, and 135 °C (275 °F) maximum peaks.

These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is required.

Type 1 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure.

Type 2 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure.

Customers who purchased SAE J188
also purchased

• ASTM D380 : Standard Test Methods for Rubber Hose
• ASTM D792 : Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
• BSI BS 5540-4 : Evaluating Particulate Contamination of Hydraulic Fluids Part 4: Method of Defining Levels of Contamination (Solid Contaminant Code)
• AFNOR NF ISO 4407 : Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope

See More Documents