Form

This specification covers a perfluoroether elastomer in the form of molded rings.

Application

These rings have been used typically as static sealing rings and molded in place gaskets at temperatures between -65 and +400 °F (-54 and +203 °C). The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness. The material has resistance to a variety of fuels, engine oils, hydraulic oil, and hydraulic fluid, but usage is not limited to such applications. Each application should be considered individually.

Safety - Hazardous Materials

While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.