SAE AMS3382C
SAE AMS3382C 1999-OCT-01 TetrafluoroethylenePropylene Rubber FEPM Hydraulc Flud and Synthetc Ol Resstant 70 to 80 and 85 to 95
SAE AMS3382C 1999-OCT-01 TetrafluoroethylenePropylene Rubber FEPM Hydraulc Flud and Synthetc Ol Resstant 70 to 80 and 85 to 95
1. SCOPE:
1.1 Form:
This specification covers two classes (durometers) of tetrafluoroethylene/ propylene rubber (FEPM) in the form of extrusions, sheet, strip, and molded shapes.
1.2 Application:
These products have been used typically for components requiring continuous operation in dry air, hydraulic fluids, and synthetic engine oils at temperatures from −5 to +232 °C (+23 to 450 °F) or in high pH chemical decontamination solutions, but usage is not limited to such applications. Each application should be considered individually.
1.3 Classes:
Product is classified as follows:
Class 1 - 70 to 80 Durometer "A" hardness
Class 2 - 85 to 95 Durometer "A" hardness
1.3.1 The class supplied shall be the class ordered.
1.4 Safety - Hazardous Materials:
While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take the necessary precautionary measures to ensure the health and safety of all personnel involved.