Form

This specification covers an electrolytic alkaline cleaner in the form of a water soluble powder.

Application

Primarily for removing grease, oil, and loose surface contamination from steel components by immersion in a solution of the cleaner at elevated temperature and with anodically applied current. This cleaner should not be used on titanium and other non-ferrous components.

Precautions

Cleaner may contain chemicals which, if improperly used, could be hazardous to the health and safety of operators. Protective clothing, including eye shields, suitable gloves, and apron, should be worn when preparing and using the cleaner. Solutions shall be prepared and operated under conditions of adequate fume extraction and with due regard to the safety recommendations of the manufacturer of the cleaner together with local workshop safety regulations.

Safety - Hazardous Materials

While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.