Form:

This specification covers a solvent-based compound in the form of a liquid.

Application:

This compound has been used typically for removal of carbonaceous soils and paint from aircraft turbine engine parts by immersion in liquid at elevated temperature, but usage is not limited to such applications. This compound should not be used on steel parts having hardness of 40 HRC or over.

Safety - Hazardous Materials:

While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.

Precautions:

Remover compound may contain chemicals which, if improperly used, could be hazardous to the health and safety of operators. Protective clothing including eye shields, suitable gloves, and apron should be worn when preparing and using remover. Tanks shall be prepared and operated under conditions of adequate fume extraction and with due regard to the safety recommendations of the manufacturer of the remover together with local workshop safety regulations.